Wire eroding is a forming manufacturing process (cutting process) which works according to the principle of spark eroding. It is also known as electroerosion machining, wire cutting. A thin, continuous wire from EDM-TEC serves as the processing electrode. [read_more id=”1″ more=”More…” less=”Less…”] The development of EDM wire has progressed rapidly in recent years. Whereas only copper wires were used in the early days of wire erosion in 1960, brass wires were already used in Japan in the mid-1970s. In 1979, Charmilles developed the first zinc-coated wire, which was continuously improved in the following years. The first gamma phase wires have been developed since the 1990s and wires with cracking surfaces were also developed in 1997 and used for the first time from 2000. Due to the continuous further development of gamma wires with cracking surface, with today’s products we achieve a multiple of the cutting speed than at the beginning of wire erosion. At the same time, the cutting accuracy and the surface quality achieved have improved enormously and are out of all proportion to the performance of copper or brass wires.
Of course the company EDM-TEC oHG has the complete portfolio of erosion wires !
Brass bright in CuZn 36, CuZn 37 or CuZn 40, with different tensile strengths, diameters and on all common DIN coils.
Hitachi Wires from Japan wires with zinc coating, according to Cobra Cut A from different manufacturers
SWX wire from Dahmen
Gamma phase wires like Gamma brass and Gamma Z exclusive in Germany and Hungary
Hybrid Puma and Hybrid Leo (Gamma wire with cracking surface) also exclusive in Germany and Hungary.
[/read_more]
-
-
Hybrid Puma
Select optionsOn request
Coated, patented gamma phase wire electrode with cracking surface
-
-
Daco-Cut 980 N
Select optionsOn request
Brass wire electrode with 980 N, especially recommended for Japanese EDM machines
-
Daco-Cut 950 N
Select optionsOn request
Brass wire electrode with 950 N, especially recommended for Japanese EDM machines
-
Daco-Cut 900 N
Select optionsOn request
Brass wire electrode with 900 N, especially recommended for Japanese EDM machines
-
Daco-Cut 500 N
Select optionsAuf Anfrage
Brass wire electrode with 500 N, especially recommended for Japanese EDM machines.
-
Molybdenium Wire
Select optionsOn request
The molybdenum wire is characterised by high wear resistance, stability and very fine diameters
-
Tungsten Wire
Select optionsOn request
The straightened wire, with untreated surface, achieves very high stability and particularly precise results
-
Gamma Brass
Select optionsOn request
Gamma Brass with a higher zinc content than copper, has a high cutting performance potential with very good surfaces
-
Hybrid Leo
Select optionsOn request
The patented gamma phase wire electrode with cracking surface, convinces with up to 30% more speed
-
SWX EU Wire
Select optionsOn request
This wire electrode is especially suitable for use on Charmilles wire EDM machines and their X technology