Description
The new Pyroelektrik Brass EDM Wire.
Our Better MS EDM wire is the further development of the bare MS EDM wire.
Its special alloy (pyroelectric) enables a cutting performance up to 20% higher than conventional MS wire.
High process reliability is guaranteed on all EDM machines.
Alloy
- 60,1 % Copper
- 0,1 % Pyroelectric Zinc Oxide
- 39,8 % Zinc
Features
- paraffin-free
- directed
- tightest tolerances
- uniform winding
- highest threading reliability
- up to 20% faster than conventional MS wires
- surface finish up to 0,2ra
- very clean surface
The available diameters, tensile strengths and bobbin sizes are shown in the following table.
| Better MS Blank wire | ||||
| Durchmesser Diameter |
Zugfestigkeit Tensile Strength |
Spulentyp Spool type |
Gewicht/Spule Weight/Spool |
Spulen/Karton Spools/Package |
| ( mm ) | ( N/mm² ) | ( kg ) | ||
| 0,20 | 500 N | K-160 | 8 | 2 |
| 0,20 | 500 N | K-200 | 16 | 1 |
| 0,20 | 500 N | P-5 | 5 | 4 |
| 0,20 | 500 N | P-10 | 10 | 1 |
| 0,20 | 900 N | K-160 | 8 | 2 |
| 0,20 | 900 N | K-200 | 16 | 1 |
| 0,20 | 900 N | P-5 | 5 | 4 |
| 0,20 | 900 N | P-10 | 10 | 1 |
| 0,25 | 500 N | K-160 | 8 | 2 |
| 0,25 | 500 N | K-200 | 16 | 1 |
| 0,25 | 500 N | P-5 | 5 | 4 |
| 0,25 | 500 N | P-10 | 10 | 1 |
| 0,25 | 900 N | K-160 | 8 | 2 |
| 0,25 | 900 N | K-200 | 16 | 1 |
| 0,25 | 900 N | P-5 | 5 | 4 |
| 0,25 | 900 N | P-10 | 10 | 1 |
| 0,30 | 500 N | K-160 | 8 | 2 |
| 0,30 | 500 N | K-200 | 16 | 1 |
| 0,30 | 500 N | P-5 | 5 | 4 |
| 0,30 | 500 N | P-10 | 10 | 1 |
| 0,30 | 900 N | K-160 | 8 | 2 |
| 0,30 | 900 N | K-200 | 16 | 1 |
| 0,30 | 900 N | P-5 | 5 | 4 |
| 0,30 | 900 N | P-10 | 10 | 1 |